Write us an eMail


or use our contact form

Please calculate 8 plus 5.

Fields marked with * are mandatory.

Service-Hotline

You can reach us by phone:

+49 2828 - 91 46 0

PPE Jacket EN ISO 11612

Category: PPE made with DuPont™ Nomex®

Comfortable and well-fitted protection.

ALWIT develops and manufactures PPE on the basis of the European Regulation 2016/425 andEuropean Standards under a certified Quality Management System (QMS) according to ISO 9001:2000. Basic Safety and Health Requirements as required in Annex II of the Directive are considered, especially by a careful selection of materials as well as the cut and design of the garments.
From the wide range of materials, ALWIT has specialized in PPE made from Nomex® Outershell and Nomex® Comfort, as well as Nomex® Basicwear for linings. With these materials, the entire range of performance is covered.

Nomex® offers

Protection
inherently flame retardant
resistant up to approx. 350 °C
insulating
antistatic (depends on type)

Comfort
lightweight (ca. 150 – 265 g/m²)
breathable
no skin irritation
no shrinkage

Life span
abrasion strength
tensile strength
durable
washable without loss of protection

Mit * gekennzeichnete Felder sind Pflichtfelder.

Please calculate 4 plus 9.
Application flame retardent safety wear, insulating, antistatic, lightweight, breathable, inherently stable, abrasion- and tear-resistant
   
Sizing  
   
Colours ecru, grey, orange, royal blue, yellow, dark blue, green, red

Mod. 44-0101 Jacket, Front flap with snap fastener, 1 chest pocket with flap, 1 inside pocket,1 side pocket with flap
Mod. 44-0171 as mod. 44-0101, deviation: 2 chest pockets with flap, 2 side pockets with flap
Mod. 44-1541 as mod. 44-0101, deviation: Front divided by a yoke, 2 chest pockets with flap and snap fastener, sleeves with snap fastener
 
Mod. 44-0301 Jacket, front flap with hidden buttons, 1 chest pocket with flap and velcro, 2 side pockets with flap and velcro
Mod. 44-0341 as mod. 44-0301, deviations: Front flap with snap fastener, sleeves with cuffs and snap fastener, ventilated rear
Mod. 44-1201 as mod. 44-0301, deviations: 1 chest pocket with flap, 1 inside pocket
Mod. 44-1402 as mod. 44-0301, deviations: front flap with buttons, 1 inside pocket
Mod. 44-1401 as mod. 44-1402, deviations: 1 inside pocket, no side pockets
 
Mod. 44-0411 Jacket, front flap with buttons, Raglan sleeves, different-coloured tuck, 1 chest pocket with flap, 1 inside pocket with flap, 2 side pockets with flap
Mod. 44-0441 as mod. 44-0411, deviations: front flap with snap fastener, retro-reflective tuck
 
Mod. 44-1831 Jacket with integrated hood to be worn under the helmet, 1 inside pocket with flap and velcro, front flap with zipper
 
Mod. 44-1701 Jacket, front flap with snap fastener, 2 side pockets with flap and snap fastener, sleeves with snap fastener
Mod. 44-1711 as mod. 44-1701, deviations: 2 inside chest pockets, no pockets on the outside
Mod. 44-2311 as mod. 44-1701, deviations: 2 inside pockets with flap and button
Mod. 44-2501 as mod. 44-1701, deviations: 1 chest pocket, 1 inside pocket, 2 side pockets, all pockets with flap and velcro, sleeves with cuffs and buttons
 
Mod. 44-4611
Jacket, yoke with reflective piping, Front flap with buttons, extended rear, golfe pleats, front part with waistband, sleeves with cuffs and velcro, 2 chest pockets with flap, 2 sloped side pockets with velcro, 2 inside pockets with velcro, 1 mobile pocket with velcro, band collar with velcro, velcro tape for labelling, 5 cm retroreflective tape on the rear
Mod. 44-4641 as mod. 44-4611, deviation: front flap with snap fastener
 
Mod. 44-7641 Jacket, yoke with reflective piping, front flap with snap fastener, 2 chest pockets, 2 side pockets, all pockets with flap and snap fastener, sleeves adjustable by snap fastener, velcro tape for labelling

Mod. 46-0101 Blouse jacket, front flap with snap fastener, sleeves adjustable by snap fastener, 1 inside pocket, 1 chest pocket with flap
Mod. 46-0171 as mod. 46-0101, deviations: front flap with ring snap fastener, Sleeves adjustable with ring snap fastener, 1 inside pocket left, 2 chest pockets with flap, arm pit ventilated by eyelets
   
Mod. 46-1831 Blouse jacket, front flap with zipper, waistband with snap fastener, slit sleeves adjustable by snap fastener, 1 inside pocket right, 2 chest pockets with flap, ventilated arm pits, 1 pocket on upper sleeve, trisectioned
   
Mod. 46-4211 Blouse jacket BIELEFELD, front flap with zipper, waistband with snap fastener, yoke of different colour, sleeves adjustable by snap fastener, ventilated arm pits, 2 inclined side pockets, 2 chest pockets with flap and snap fastener, 2 x 5 cm retro-reflective tape on sleeves and torso