Write us an eMail

or use our contact form

Please add 8 and 2.

Fields marked with * are mandatory.


You can reach us by phone:

+49 2828 - 91 46 0

Fire Fighting Suit "GRISU PRO" EN 469

Mod.-Nr: 33-2109 Category: Turnout gear

The new lightweight "GRISU PRO"

GRISU - under this name ALWIT manufactures and distributes Personal Protective Equipment (PPE) for firefighters, independent of outer shell material, color, and location, size or kind of pockets, retroreflective or/ and fluorescent elements.
Developing GRISU the Basic Health and Safety Requirements of Annex II of Regulation (EU) 2016-425 have been taken into consideration. That concerns especially the choice of materials as well as the design of the garments. All these types of GRISU are designed according the basic and additional requirements of EN 469.
GRISU is intended to protect firefighters' body excluding head, hands, and feet, from the effects of heat and flame at firefighting.

Total weight: jacket 1,9 kg + trousers 1,3 kg

Mit * gekennzeichnete Felder sind Pflichtfelder.

What is the sum of 3 and 2?

higher durability by 300% better tensile strength
even after 40 washes still compliant to EN 469 due to PowerShell finish
no need for re-impregnation
less pilling
less fading

para-aramide in 3D-structure
excellent thermal insulation
extreme low water vapour resistance

extremely lightweight
permanently hydrophilic by structure
no need for re-impregnation
Application fire fighting on and in buildings
Sizes 1/S (46/48), 2/M (50/52), 3/L (54/56), 4/XL (58/60) , 5/XXL (62/64)
Total weight 3,2 kg

Jacket Mod. 33-2109
  closure by metal quick-release zipper
  covered by a wide flap with velcro closure
  bottom with additional snap fastener
  1 radio pocket on the left upper front,
  separate yoke with inserted microphone-loops
  and velcro at both sides as well as a flashlight
  loop right
  2 inserted side pockets with flap
  closed by velcro with opening tag
  loop with snap hook under the left pocket flap
  stand up collar with flap and velcro closure
  sleeves ergonomically tailored by parting seams
  hem of the sleeves edged
  sleeves adjustable by velcro-bar
  additional knitted cuff with thumb hole
  shoulders and back padded
  wicking barrier inside at the hem of sleeves and seam
  reflective trim
  (yellow/silver/yellow) 5 cm wide 2-ply at the seam
  and the sleeves
  7,5 cm wide 2-ply vertically at front and back
  velcro for rear shield - if required
Trousers Mod. 33-2109
  front fly with zipper, covered by inclined flap with velcro
  elastic band in the back waist, waist adjustable by velcro-bar
  higher back part, padded, suspender reversible and additionally padded
  2 side pockets, 2 pocket-reach-throughs
  2 bellow-pockets with flap closed by velcro
  knife pocket with inclined opening on the right bellow pocket
  knee-reinforcement made of silicone coated para-aramide knitwear with additional padding made of para-aramide non-woven
  seams with dust-protection inside and outside
  the back with cut-out to avoid trapping
  reflective trim (yellow/silver/yellow) 7,5 cm wide around and vertical up to the knee-reinforcement
  revision opening by zipper at the left side seam
  repair opening at the back under the waistline